➕ Add Text x86 registers

README.md

@@ -1,6 +1,18 @@
 # x86-assembly-Reverse-Engineering
 Knowledge I have found interesting about the topic of x86 assembly
+
+## 
+
 ## x86 Registers
+
+*(Older Text from University of Virginia Computer Science (2006), one of the best Guides for x86 Assembly)*
+
+Modern (i.e 3**86** and beyond) x**86** processors have eight 32-bit general purpose registers, as depicted in Figure 1. **The register names are mostly historical**. For example, **EAX** used to be called the accumulator since it was used by a number of arithmetic operations, and **ECX** was known as the counter since it was used to hold a loop index. Whereas most of the registers have lost their special purposes in the modern instruction set, by convention, two are reserved for special purposes — **the stack pointer (ESP)** and the **base pointer (EBP).**
+
+For the **EAX**, **EBX**, **ECX**, and **EDX** registers, subsections may be used. For example, the least significant 2 bytes of **EAX** can be treated as a 16-bit register called **AX**. The least significant byte of **AX** can be used as a single 8-bit register called **AL**, while the most significant byte of **AX** can be used as a single 8-bit register called **AH**. These names refer to the same physical register. When a two-byte quantity is placed into **DX**, the update affects the value of **DH**, **DL**, and **EDX**. These sub-registers are mainly hold-overs from older, 16-bit versions of the instruction set. However, they are sometimes convenient when dealing with data that are smaller than **32-bits (e.g. 1-byte ASCII characters)**.
+
+When referring to registers in assembly language, **the names are not case-sensitive**. For example, the names **EAX** and **eax** refer to the **same register**.
+
 ![x86 assembly Registers](x86-registers.png)
 
 In **x86 registers** have an '**e**' in front of their name.</br>